USER GUIDE HELMETS FOR MOUNTAINEERS

This helmet is designed solely for mountain climbing. It must not be used for any other activity, for example:motor sports, snow sports or cycling. The protection provided by a helmet depends on the circumstances of the accident; wearing a helmet cannot always prevent death or long-term disability. This helmet complies with the European standard 12492. It helmet absorbs the energy of an impact through partial destruction of, or damage to, the helmet; any helmet subjected to a severe impact should be replaced, even though such damage may not be readily apparent. Users are also reminded that they should not modify or remove any of the original component parts, unless indicated by the manufacturer, as this may damage the helmet. No attachments or accessories should be added to the helmet unless recommended by the manufacturer. Do not apply paint, solvents, adhesives or self-adhering stickers to your helmet, unless specified in the manufacturer’s instructions. When cleaning, maintaining or disinfecting your helmet, avoid using any substance that may damage the helmet or adversely affect the user, in accordance with the information and instructions supplied by the manufacturer.

Read these instructions carefully before each use and keep them for future reference. To ensure the helmet offers adequate protection, it must be adapted or adjusted to fit the user’s head size. Try different sizes and choose the one that best fits your head circumference. Refer to the size displayed inside the helmet.

To ensure the helmet offers adequate protection, it must be adapted or adjusted to fit the user’s head size. It must be correctly buckled, in accordance with the instructions set out in this guide. Place the helmet on your head and adjust the cradle system. Shake your head gently to check that the helmet is on properly: the helmet shouldn’t move. Side strap buckles: Adjust the side buckles so they form a «Y» under the ear lobe, without covering it. Adjust the length of the straps to ensure that the helmet fits properly at the back (doesn’t expose forehead) and at the front (doesn’t impede vision). Fastening: The strap must go under the chin, against the throat. The strap must be adjusted to the correct tightness: neither too tight nor too loose. The buckle must not press against the chin. You know the straps are properly adjusted if, when the helmet slips backwards, the forehead remains covered and when it slips forwards, the field of vision remains unaffected. Note: you should not be able to lift up the helmet when it is properly fastened. It is fitted with a retention system to prevent it from unclipping in the event of an accident.

If the inner foam is damp after extended use, we recommend that you remove it to help it dry more quickly but avoid direct contact with any heat sources. If the foam or helmet are dirty, clean and disinfect using a sponge or cloth and a little soapy water.

Never modify or remove any of the helmet’s original component parts. Only use spare parts, designed for this type of helmet, available from DECATHLON after-sales department. Depending on the model, some spare parts are available from the after-sales department. Never try to modify the helmet yourself. This helmet should not be used by children while climbing or doing activities where there is a risk of strangulation if the child gets trapped by their helmet. Only use spare parts, designed for this type of helmet, available from DECATHLON after-sales department. Following an impact, the helmet must be replaced, even if it was not in use at the time and there is no visible damage. Wearing a helmet can reduce the severity of head injuries but cannot prevent serious or even fatal injuries. It does not provide guaranteed protection against all impacts. A helmet that is damaged as a result of an impact has performed its job.

always store in a dry place, away from direct sunlight or any heat source. after drying, ideally store in a canvas bag.

Climbing equipment has a limited service life. Check your equipment before and after each use, replace it if damaged or if it has reached its maximum period of service, namely 10 years from the date of manufacture, even if it has not been used or has been correctly stored. Damage and extreme conditions can reduce the service life of your equipment so you may even need to replace it the first time you use it. Inspect your equipment immediately if you suspect it has incurred any damage whatsoever during use. Additional factors that may affect the service life of your climbing equipment: impact (whether significant or moderate), exposure to heat, direct sunlight, corrosive substances, solvents, flammable products, battery acid or fumes. Never apply paint, detergent or any other chemicals. Never apply transfers or self-adhesive stickers. It might weaken your helmet. Your helmet may be damaged if exposed to temperatures above 50°C (for example in a hot car). Helmets exposed to high temperatures must be replaced as they may well be damaged even if there are no visible signs. If your helmet needs disinfecting, we recommend you replace it rather than exposing it to aggressive chemical products. Destroy any unserviceable equipment to prevent it from being used again. The product’s service life begins from the date of manufacture (indicated on the product) and not the date of sale. 

This product must remain in its original packaging during transportation from the factory to the shop shelf. 

It must be stored in accordance with the instructions set out in this leaflet. 

Notified Body responsible for issuing certificates: Financière POURQUERY – 2789 / 2 Espace henry Vallée CS 67251 69354 LYON CEDEX 07 - FRANCE EC approval certificate: 

View the EU declaration of compliance on the website: www.supportdecathlon.com 
1) Choose your language on the homepage 
2) enter the article and/or model and/or XXX code in the search engine 
3) open the product data sheet 
4) the declaration is at the bottom of the product data sheet